Flue Gas Desulphurization Manufacturers

Flue Gas Desulphurization Manufacturers

Flue gas desulfurization (FGD) is a set of technologies used to remove sulphur dioxide (SO2) from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes.Flue-gas desulfurization (FGD) is a control device used to remove sulfur dioxide (SO2) from exhaust flue gases using an alkaline reagent to produce a solid copund. In this chemical reaction >90% of the sulfur dioxide (SO2) from the flue gas can be removed and converts the limestone into calcium sulphite (CaSO4).We can design and deliver an extended service program or a stand-alone replacement parts program to address your needs and help you keep your system operating at peak performance.Flue Gas Desulphurization Manufacturers, Flue Gas Desulphurization Manufacturers

Proven Technology :

Latest State of the Art Technology for Dry. Wet and semi Dry Flue Gas De-Sulpherization sutaible for any size of plant and achieving low emissions up-to 30mg/nm3

Packed bed system

    • Low capital cost
    • High efficiency
    • compact designs
    • very low pressure drop
    • internal suitable to gases and sorbent
    • Normally use sea water , Sodium hydroxide, soda ash , HCL etc. as regent
    • large references for fumes , paint fumes, volatile matters ,carbon dioxide,sulphar dioxide and others

Lime Base System

    • low pressure drop design
    • Lime And Lime Stone Based Efficient systems leading to production of high quality gypsum

Product services

    • feasibility studies
    • Erection and commissioning support
    • Rectification and refurbishment of existing old systems
    • Design , Engineering , manufacturing and supply of complete FGD system

Sea Water FGD

    • Natural System
    • Suitable for shore based plants
    • highly cost effective
    • low pressure drop design possible
    • available in spray as well as packed tower design

Salient Features 

    • High availability of system >99%
    • Highly efficient and low pressure drop
    • Lime scrubbing of product of gypsum
    • Caustic with regeneration for low cost operation

Efficient System Design 

    • Low pressure drop: System design with low to very low pressure drop leading to low operational cost over the life time. In many cases, the existing fans can be retrofitted thereby saving the capital cost and space.
    • Sticometric chemical consumption :Chemical consumption is optimize hence reducing the cost of operation. the loss due to excess carry over of sorbents is key to efficient operation